Steel Piers
Standard Height Dyna Pier
DP-1300
Fully assembled steel pier. Quick mates to Floor plate (DP-Floor) or can be bolted to other surfaces. ź-20 hole in top, but can be special ordered with any size hole. Any ź-20 Mount, such as our Dyna Cradle will fit on top. With the use of the mounting plate MP4 (ETX), you can mount any of the ETX scopes on it, or with the MP-1 mounting plate, it will fit LX-10, LX-200 or C5i or C8i. Pre drilled and capped one inch holes at top and bottom for internally routing cables.
Finish: textured Black Powder coated finish. Includes four bolts, washers and wrench.
Most tools used for building telescopes and the like can be found online or in technical sales.
Height: 51.5″ or 1300mm Weight: 42 pounds (19kg.)
Dyna Pier Angles Arm
(for my wheelchair confined friends and family)
DP-Angle
Fully assembled steel pier. Quick mates to Floor plate (DP-Floor) or can be bolted to other surfaces. ź-20 hole in top, but can be special ordered with any size hole. Any ź-20 Mount, such as our Dyna Cradle will fit on top. With the use of the mounting plate MP4 (ETX), you can mount any of the ETX scopes on it, or with the MP-1 mounting plate, it will fit LX-10, LX-200 or C5i or C8i. Pre drilled and capped one inch holes at top and bottom for internally routing cables. Balanced for one person installation.
Finish: textured Black Powder coated finish. Includes four bolts, washers and wrench.
Height under arm 31″ (to accommodate wheel chairs) Height at mounting point 34.5″ Arm is 19″
Weight 41 Pounds (19kg.)
Quick Flush Mounting Floor Plate for Dyna Piers
DP-Floor
This is the flush mounting base for the Dyna Piers A 8 inch x 8 inch stainless steel plate that you set flush into concrete. The Dyna Piers attaches quickly with only four bolts, allowing quick realignment and removal when not in use. Supplied with a kit of flush mounting stainless screws (to keep the holes from filling with ice and debris when not in use) and wrench.
Weight: 8 pounds (3.6 kg.)